基于颗粒分布参数的泥石流重度计算方法

    THE RELATIONSHIP BETWEEN DEBRIS FLOW DENSITY AND PARTICLE SIZE PARAMETERS

    • 摘要: 重度是泥石流的一项重要参数,在实际工作中很难对正在发生的泥石流进行观测,为简单快捷又准确地获取泥石流的重度,本研究基于云南蒋家沟泥石流2004~2007年以及1974~1975年等多年观测数据,提出了一种利用泥石流颗分数据计算泥石流重度的方法。研究结果表明泥石流颗粒组成均满足标度分布:P(D)=KD-μexp(-D/Dc),泥石流的颗粒组成可以用标度分布参数μDc表示,μ代表土体的孔隙度,Dc代表颗粒整体的组成范围。研究发现泥石流的重度ρ与颗分参数μDc都有一定的关系,并提出了相应的泥石流重度计算公式:ρ=1.26μ-0.132+0.049Dc0.443,该公式所涉及参数与泥石流所处的区域参数无关,只由泥石流的颗粒组成决定,不需要人为设定某些特征粒径,避免了人为主观因素的干扰,因此,该公式的适用性没有区域限制。由于μDc对颗粒组分的变化很敏感,因此可以用μDc这两个参数来对泥石流的演化过程进行刻画。

       

      Abstract: Sediment concentration is a key parameter in characterizing debris flows. Given the challenges associated with direct observation of active debris flows in practical settings,this study proposes a method for estimating sediment concentration using particle size distribution data. The method is based on long-term monitoring data from Jiangjia Gully in Yunnan Province,covering the periods 2004-2007 and 1974-1975. The results indicate that the particle size composition of debris flows follows a scaling distribution: P(D)=KD-μ=exp(-D/Dc). The parameters μ and Dc effectively represent the particle composition,where μ reflects the porosity of the soil and Dc indicates the overall range of particle sizes. The study demonstrates that sediment concentration ρ is correlated with the parameters μ and Dc,leading to the development of a corresponding calculation formula. This formula is not regionally restricted,as it relies solely on the particle composition of the debris flow,eliminating the need for predefined characteristic particle sizes and minimizing subjective bias. Given the sensitivity of μ and Dc to changes in particle composition,these parameters can also be used to characterize the evolutionary process of debris flows.

       

    /

    返回文章
    返回