土钉加固边坡系统可靠度多重响应面分析方法

    HYBRID RESPONSE SURFACE METHOD FOR SYSTEM RELIABILITY ANALYSIS OF SOIL NAILED SLOPES

    • 摘要: 土钉由于支护效果好、造价低廉及施工简便等优点,广泛应用于边坡加固工程以提升边坡稳定性。一个土钉加固边坡中可能存在多个潜在滑动面,且沿各潜在滑动面的各排土钉有多种可能的失效模式组合,导致土钉加固边坡系统的可靠度分析极具挑战性。为了更全面地分析土钉加固边坡的系统可靠度,本文结合多排土钉加固边坡沿多个滑动面的多种失效模式,提出了用于高效计算土钉加固边坡系统可靠度的多重响应面法,并给出了主导土钉加固边坡系统可靠度的代表性失效模式的识别方法,最后通过一个土钉加固边坡算例介绍了该方法,并提供了土钉加固边坡基于可靠度的设计建议。结果表明:土钉加固边坡的系统可靠度通常仅由几个代表性失效模式主导。由于土钉加固边坡与无加固边坡的第一代表性失效模式及其所在的滑动面均不相同,依据无加固边坡的代表性失效模式进行土钉加固边坡设计可能不够保守。建议依据土钉加固边坡的代表性失效模式进行设计,若为拉断破坏失效模式,则可通过增加土钉排数以提高土钉加固边坡的系统可靠度;若为拔出破坏或深层失稳失效模式,则可通过增加土钉长度以提升系统可靠度。研究成果可为土钉加固边坡的系统可靠度分析和设计提供有效手段。

       

      Abstract: Soil nails are widely used for slope reinforcement due to their good support performance, cost-effectiveness, and ease of construction, all of which contribute to improved slope stability. In soil-nailed slopes, multiple potential slip surfaces may exist, with various possible failure modes for each row of nails along each slip surface, making system reliability analysis highly complex. To conduct a more comprehensive system reliability assessment, this study considers multiple failure modes along various slip surfaces in multi-row soil-nailed slopes. A hybrid response surface method is proposed for efficient system reliability analysis, along with a procedure for identifying the dominant failure modes that govern system reliability. An illustrative soil-nailed slope example is presented to demonstrate the proposed method, and design recommendations are provided. The study shows that the system reliability of a soil-nailed slope is typically dominated by only a few representative failure modes. Since the first representative failure mode and its associated slip surface for a soil-nailed slope differ from those of an unreinforced slope, designing based on the unreinforced slope's representative failure mode may be non-conservative. It is therefore recommended to base the design on the representative failure modes of the soil-nailed slope. If tensile failure is the governing mode, system reliability can be improved by increasing the number of nail rows. If pullout failure or deep-seated failure dominates, increasing the nail length can enhance system reliability. These findings provide an effective approach for system reliability analysis and design of soil-nailed slopes.

       

    /

    返回文章
    返回