Abstract:
Laboratory and in situ tests show that some natural sedimentary clays exhibit strong structures(interparticle bonding and large void ratios), and the clay structure directly affects ground deformation calculations. Therefore, intensively studying the compression characteristics of structured clays with varying bonding and void ratios is of great engineering significance. This study reviewed the sampling materials for laboratory-prepared structured clays and summarized the main steps for preparing structured clay using compaction and consolidation methods. Formulas for calculating the required mass of sampling material when preparing structured clays with different bonding and void ratios were derived. The effects of bonding and void ratio on the compression characteristics of structured clays were investigated using confined compression tests. Test results show that, under the same initial void ratio, the structural yield stress increased with increasing cement content. Greater cement content(bonding strength) resulted in a greater structural degradation rate. Under the same cement content, smaller initial void ratios resulted in greater structural yield stress. Larger initial void ratios resulted in a relatively greater structural degradation rate of kaolin structured clay; that is, a greater compression index after exceeding the structural yield stress.