Abstract:
To investigate the deformation behavior and parameter evolution of sandstones with different porosities under finite cyclic loading at various confining pressures and cyclic stress amplitudes,and to assess the applicability of a cyclic constitutive model,a series of cyclic loading tests was conducted. The evolution of the stress-strain relationship,secant modulus,Poisson's ratio,and permanent deformation was analyzed. An
E-N hyperbolic relation ̄ship was employed to characterize the cyclic stress-strain behavior,and the model predictions were compared with the experimental results. The results show that,under cyclic loading,sandstone exhibits two stages: rapid compaction and structural stabilization. The secant modulus increases rapidly during the initial stage and then gradually stabilizes,whereas Poisson's ratio first decreases and then increases,reflecting a unified structural reconstruction mechanism involving pore closure and damage propagation. The
E-N hyperbolic relationship effectively captures the evolution of stiffness and permanent deformation during cyclic loading. Except for the first cycle,the model predictions agree well with the experimental results. These findings indicate that the model is suitable for quantitatively evaluating the cyclic response and stability of materials under conditions without macroscopic failure and with a limited number of loading cycles. However,when the stress state approaches the peak strength,the predictive accuracy of the model decreases significantly because of rapid damage accumulation and markedly enhanced nonlinear behavior.