Abstract:
To characterize secondary collapse disasters along highways following the 2022 Lushan
MS6.1 earthquake, this paper takes the Lianghekou-Dengchigou section of National Highway G351 in Baoxing County as a case study. The distribution patterns of hazard-predisposing factors were statistically analyzed, and their disaster-inducing contribution weights were calculated by integrating the entropy weight method and the analytic hierarchy process (AHP). Accordingly, a hazard assessment method for unstable rock masses under multi-factor coupling was established. Combining field investigations and 3D kinematic simulation, the features of secondary collapse disasters in the study area were analyzed along the entire process chain—from unstable rock mass formation and collapse triggering to rockfall disaster occurrence—supported by typical case analyses. The results indicate that 69.69% of unstable rock masses in the study area lie at an elevation difference of 30~400 m relative to the highway; 96.97% are developed on slopes with angles of 60°~90°; 33.33% occur in limestone strata; 78.78% are situated at a horizontal distance of 200~500 m from faults; 69.69% are associated with outward-dipping structural planes; and 69.70% of unstable rock blocks have grain sizes of 0.2~2 m. The disaster-inducing contribution weights of the hazard-predisposing factors rank in descending order: lithology (0.251) >strike angle (0.247) >horizontal distance to faults (0.143) >elevation difference (0.137) >grain size (0.126) >slope angle (0.096). A comprehensive risk index
Ri is proposed to quantify the hazard level of unstable rock masses under multi-factor coupling. The formation of unstable rock masses in the study area is governed by the combined dissection of structural planes. Slope height amplifies the seismic cracking and loosening effect, while the spatiotemporal overlap of rainfall and high temperature aggravates structural plane damage through dry-wet cycles. Rainfall-induced collapse initiation can be divided into four stages: wetting and weight gain of slope-surface rock and soil, water-induced deterioration of structural planes, basal damage of unstable rock masses, and collapse catastrophe triggering. A stability evaluation formula for unstable rock masses in limestone strata is derived, accounting for the water-induced deterioration effect of structural planes. The kinematic simulation reproduces the gully-convergence effect during rockfall propagation, and the degree of surface undulation dominates the impact energy, movement velocity and bounce height of moving rockfalls. It is recommended that open tunnels be prioritized for highway segments threatened by rockfall disasters in the study area, and disaster mitigation measures be implemented by zoning and segmentation based on unstable rock mass hazard levels. The research outcomes provide a technical reference for the prevention and control of post-seismic secondary collapse disasters on mountainous highway slopes.